Ritmo Butt Fusion

Price on Request: Get Latest Price

Product Brochure
Plastic Pipe Welding Delta 800 Butt Fusion Ritmo

With DELTA 800 it is possible to weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).
- A machine body with a steel bearing frame- Self detaching device: helps removing the heating plate during welding procedure- An extractable heating plate with separate thermometer for reading the working temperature- An extractable electric milling cutter with a safety microswitch and overload cutout- An electrohydraulic gearcase - Digital electric connections box with the temperature controller- A milling cutter/heating plate support
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 500 to 710 mm- Tool for flange necks- Electrical crane- Special transport wooden case (machine body with trolley)- Wooden case for inserts- Machine body trolley- Data-logging THE INSPECTOR- Rollers 

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
With DELTA 630 it is possible to weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).Available in 230 V and 400 V.
- A machine body with a steel bearing frame- Clamps in steel- Insert in steel with quick locking/unlocking system. No tools required- Self detaching device: helps removing the heating plate during welding procedure- An extractable heating plate with separate thermometer for reading the working temperature- An extractable electric milling cutter with a safety microswitch and overload cutout- Milling cutter’s plastic control box is protected by a metal frame- Unlocking Milling Cutter, fast removing system to speed up the extraction from machine body- An electrohydraulic gearcase - Digital electric connections box with the high precision (± 1°C) “Digital Dragon” temperature controller- A milling cutter/heating plate support
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 280 to 560 mm- Tool for flange necks- Electrical crane- Special transport wooden case (machine body with trolley)- Wooden case for inserts- Machine body trolley- Hydraulic rollers- Data-logging THE INSPECTOR- Rollers
 
Tehnical Specification: 

Price on Request: Get Latest Price

Product Brochure
BASIC 355 is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.
- A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings - An extractable heating plate with DIGITAL DRAGON, high - precision electronic thermo-regulator- An extractable milling cutter, with safety micro-switch- An electrohydraulic gearcase, with a clamp opening and closing lever- A hydraulic hoses with non – drip quick couplings- Adapters SMARTLocK (RITMO patented) from Ø 125 to 315 mm, Master adapters Ø 250 mm
ON REQUEST (ACCESSORIES)- Tool for flange necks- Trolley- Rollers- THE INSPECTOR Data-logging

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
BASIC 315 is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.
- A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings- An extractable heating plate with DIGITAL DRAGON, high - precision electronic thermo-regulator- An extractable milling cutter, with safety micro-switch- An electrohydraulic gearcase, with a clamp opening and closing lever- A hydraulic hoses with non – drip quick couplings- Adapters SMARTLocK (RITMO patented) from Ø 90 to 280 mm, Master adapters Ø 250 mm
ON REQUEST (ACCESSORIES)- Tool for flange necks- Trolley- Rollers- THE INSPECTOR Data-logging

Technical Specification:

Price on Request: Get Latest Price

Product Brochure

DELTA 500 ALL TERRAIN is powered by a low-vibration diesel engine and equipped with front steering wheels and rear traction. The machine is suitable for welding pressure pipes (HDPE, PP) for the transportation of water, gas and other fluids up to Ø 500 mm (20 "IPS).

Built according to the International standards ISO 21307 HIGH PRESSURE.

- Working range from Ø 200 to 500 mm (6" IPS ÷ 20" IPS)
- Welds fittings like elbows, tees, Y-branches and stub flanges
- New RITMO Patented assisted system to open/close/lift clamps-heater-facer
- Fast-locking system which allows to place and remove inserts in seconds
- Easy Life welding system
- GPS traceability
- Data-logging included
- Memory up to 4000 joint reports - downloadable straight into a PDF file
- Possibility to pre-set 20 customized
- USB port for firmware upgrade
- Intuitive control panel and large graphic display
- Machine body and on-board generator easily removable for working in tight spaces
- Machine can be powered using 230 V Three phase 50/60 Hz
- Wheeled chassis designed to be lifted using a forklift
- Two lateral rollers that can be operated by a cordless drill
- On-board electric facer that is equipped with a safety microswitch
- On-board generator removable for independent use 

Technical features:

 

Price on Request: Get Latest Price

Product Brochure

Butt fusion welding can be managed automatically by using the DELTA DRAGON CNC system; this would eliminate any risk of error due to the operator.

It is available in two versions: SA with manual extraction of heating plate, FA with integrated mechanical extraction of heating plate. 
The CNC system is available for the Delta Dragon 250 B and 315 B models.

The gearcase it is equipped with a compact and innovative plastic casing, which can resist to the most extreme job site working conditions; particular attention was paid to the connections as well, by applying military type plugs. An easy to use software and control panel allow to view the most widely used welding standards (ISO, GIS, DVS and other).
By selecting any one of the standard and pipe diameter/SDR, all the welding parameters (pressure, time, temperature) would be automatically calculated according to the standard itself. If the chosen welding cycle is not included in the standards listed above, it is possible to manually input the welding parameters (diameter, SDR, type of material, welding time and pressure…) by simply entering the “out of standard” mode. In both cases, the machine is able to automatically manage all the phases of the welding cycle, including milling and heating control.

At the end of the welding cycle, all data are stored in the in-built memory, up to 4000 records.
Serial ports enable the operator to connect the gearcase to a portable serial printer (to obtain an immediate report) or to a PC. The gearcase is equipped with a USB port for welding report in PDF and to firmware upgrade.

The complete configuration includes:
- a linear transducer applied to the machine body
- a extractable heating element SA or FA
- hydraulic hoses with non-drip quick couplings for connecting the gearcase to the machine body
- a milling cutter
- a transducer cable for connecting the gearcase to the machine body
- a milling cutter/heating plate support

Technical features:

Delta Dragon 250 CNC

 

Materials             HDPE/PP/PB/PVDF

Working range  Ø 75 ÷ 250 mm

Power supply     110 or 230 VAC 50/60 Hz

Total absorbed power   4000 W (110 V) - 4150 W (230 V)

Working temperature    180° ÷ 280° C

Memory records              4000

Weight machine body    90 Kg

Weight gearcase               39  Kg

Dimensions machine body           1000x820x1000 mm

Dimensions gearcase      585x384x463 mm

Price on Request: Get Latest Price

Product Brochure

Plastic Pipe Welding Delta 355 all terrain Butt Fusion Ritmo 

DELTA 355 ALL TERRAIN:  welds HDPE, PP pipes and fittings for the transportation of gas, water and other fluids under pressure from 125 mm to 355 mm or from 4” IPS to 14” IPS. It is designed to work according to welding standard ISO 21307 High Pressure. DELTA 355 ALL TERRAIN can be equipped with two types of engine: diesel low vibration and petrol. The engine, like an electrical generator, indipendently gives the necessary power supply to the machine during all its

working and movement phases.

 

Machine composition:

- Removable control panel with data-logging, memory up to 4000 welding reports, GPS treacebility; USB port for welding report / data download / firmware upgrade. Easy-life welding control system: hardware and software have been developed to interact to each other sharing data during the entire workflow. Once set the welding parameters up, the system guarantees the repetition of the welding cycle, avoiding errors. The operator only have to confirm the work phases on the just pushing a button. Possibility to pre-set 20 customized

- Chassis is equipped with front steering wheels and rear traction; parking brake, machine frame design for forklift lifting

- Removable machine body to work in tight spaces with shavings collection tray

- Dragging bar designed to weld between the 3rd and 4th clamp

- Ritmo patented insert quick release SMARTLOCK SYSTEM

- On-board electrical milling cutter with integrated locking handle system, safety switch-off device, motor thermic

protection and gas spring to easily lift/lower the facer

- On-board heating plate with protection frame and insulated protection bag; gas-spring for easy lift/lower the heating plate

- Heating plate and facer locking system for safe transportation

- Two hydraulic rollers for pipe loading and unloading

- Kit for network power supply connection (upon request) excluding the machine engine and weld in closed enviroments

- 25 lt capacity tank for more than 12 working hours operating time

ON REQUEST (ACCESSORIES)

 

Clamps’ inserts from Ø 125 to 315 mm (MASTER 250 mm); 4" ÷ 12" IPS; 4" ÷ 12 " DIPS 

- Tool for flange necks/stub-end holder

- Inserts’ transportation box

- Data-logging software and cable

Technical features:

Price on Request: Get Latest Price

Product Brochure

DELTA 1000 TRAILER is a self-aligning fusion machine, suitable for welding thermoplastic pipes for the transport of water, gas and other fluids under pressure, up to Ø 1000 mm ( 36" IPS/DIPS).
Machine can fuse pipes according to the ISO 21307 High Pressure standard.

Standard machine features:
- Machine body mounted on a 4 wheeled chassis, easily removable for working in tight spaces; steel hydraulic clamping with the fast-locking inserts, which allows to place and remove inserts in seconds; self detaching device: helps removing the heating plate during welding procedure.
- 4 wheeled chassis with 2 steering wheels and a safety brake
- An on-board hydraulic electric facer that is equipped with a safety microswitch to prevent from accidental starts, a thermal circuit breaker to protect motor
- An on-board hydraulic heating plate Teflon-coated (PTFE) which comes with a high-temperature-proof bag, which also avoid the heating element from being scratched
- An EASY LIFE control panel with a large graphic display and GPS traceability, which is also removable from the machine body to be able to weld from outside the ditch. Allows the operator to program and pilot all the welding cycle in an easy, fast and very intuitive way. Includes a data-logging system to store full welding data, downloadable through a USB port straight into PDF files. The EASY LIFE system has the capability store up to 4000 joint reports.
Possibility to pre-set 20 customized
- Two hydraulic lateral rollers
- Control panel for hydraulic movements.

DELTA 1000 TRAILER allows to easily weld fittings like elbows, tees, Y-branches and stub flanges.

Technical features:

 

Materials             HDPE/PP

Working range  Ø 335 ÷ 1000 mm ; 14 IPS ÷ 36 IPS/DIPS

Power supply     230 V Three Phase 50/60 Hz

400 V Three Phase 50/60 Hz

Total abdorbed power   32000 W

Working temperature    180° ÷ 280°

Outside temperature range         -10° ÷ 40° C

Weight  machine body   1950 Kg

Weight Standard composition     3770 Kg

Dimensions machine body           3888x1990x1929 mm

Dimensions with trolley 4449x3700x3268 mm

Price on Request: Get Latest Price

Butt fusion welding can be managed automatically by using the DELTA DRAGON CNC system; this would eliminate any risk of error due to the operator.

It is available in two versions: SA with manual extraction of heating plate, FA with integrated mechanical extraction of heating plate. 
The CNC system is available for the Delta Dragon 250 B and 315 B models.

The gearcase it is equipped with a compact and innovative plastic casing, which can resist to the most extreme job site working conditions; particular attention was paid to the connections as well, by applying military type plugs. An easy to use software and control panel allow to view the most widely used welding standards (ISO, GIS, DVS and other).
By selecting any one of the standard and pipe diameter/SDR, all the welding parameters (pressure, time, temperature) would be automatically calculated according to the standard itself. If the chosen welding cycle is not included in the standards listed above, it is possible to manually input the welding parameters (diameter, SDR, type of material, welding time and pressure…) by simply entering the “out of standard” mode. In both cases, the machine is able to automatically manage all the phases of the welding cycle, including milling and heating control.

At the end of the welding cycle, all data are stored in the in-built memory, up to 4000 records.
Serial ports enable the operator to connect the gearcase to a portable serial printer (to obtain an immediate report) or to a PC. The gearcase is equipped with a USB port for welding report in PDF and to firmware upgrade.

The complete configuration includes:
- a linear transducer applied to the machine body
- a extractable heating element SA or FA
- hydraulic hoses with non-drip quick couplings for connecting the gearcase to the machine body
- a milling cutter
- a transducer cable for connecting the gearcase to the machine body
- a milling cutter/heating plate support

 

Technical features:

Delta Dragon 315 CNC

 

Materials             PE/PP/PB/PVDF

Working range  Ø 90 ÷ 315 mm

Power supply     110 o 230 VAC 50/60 Hz

Total absorbed power   4500 W (110 V) - 5150 W (230 V)

Working temperature    180° ÷ 280° C

Memory records               4000 cicli

Weight machine body    125 Kg

Weight gearcase               39 Kg

Dimensions machine body           1150x970x1170 mm

Dimensions gearcase      585x384x463 mm

Price on Request: Get Latest Price

Product Brochure
REMEDY 1000 EL is an independent, high-productivity welding machine driven by tracks and powered by a Diesel 3.6-cylinder in-line Turbo-Common Rail on-board generator. The machine designed for butt-welding HDPE and PP pipes up to Ø 1000 mm for the transportation of water, gas and other fluids under pressure. The machine can weld according to ISO 21307 High Pressure and ASTM F2620 standards.- Working range from Ø 355 to 1000 mm- EASY LIFE welding system that allows the operator to program and control the machine welding cycle in a simple, fast and intuitive way. The system incorporates a data-logging for welding data record and a GPS for traceability data storage. The internal memory allows to record up to 4000 welds (including diameter and SDR settings) and to download them in PDF via USB port. The welding machine memory can store up to 20 customized working parameters for immediate recall.- The machine body it’s easily removable from the tracks so to be able to work in confined spaces. An extension kit for working in the ditch is available on request. It is also possible to disconnect the welding machine from its generator and connect it to an mainline or another external generator.- Hydraulic system for opening and closing the clamps.- Electrohydraulic milling cutter on board with safety microswitch and hydraulic movement on the machine- Heating plate with hydraulic movement on the machine, coated with Teflon (PTFE) and supplied with a high temperature resistant casing, which prevents the plate from being damaged by scratches.- Terrain and slope: drives up to 35% slopes- Remote tracks control for driving the machine on ground (up to 100m range).- Control panels for the hydraulic movement of the hotplate cutter and lateral roller. Controlled by intuitive and practical levers.- Removable Easy Life welding cycle panel with graphic display.- Hydraulic side rollers to facilitate pipe loading and handling.- Raised working position with platform for working and operating comfortably.- Adjustable width between tracks for easy transportation.- REMEDY 1000 EL is able to weld fittings such as bends, tees, branches and collars for flanges.
 
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 335 to 900 mm; 14" ÷ 36" IPS; 14" ÷ 36 " DIPS - Tool for flange necks- Kit for IN-DITCH use- Kit hoist

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
Plastic Pipe Welding Machine Delta Dragon 250 CNC Ritmo

 Butt fusion welding can be managed automatically by using the DELTA DRAGON CNC system; this would eliminate any risk of error due to the operator.
It is available in two versions: SA with manual extraction of heating plate, FA with integrated mechanical extraction of heating plate. The CNC system is available for the Delta Dragon 250 B and 315 B models.
The gearcase it is equipped with a compact and innovative plastic casing, which can resist to the most extreme job site working conditions; particular attention was paid to the connections as well, by applying military type plugs. An easy to use software and control panel allow to view the most widely used welding standards (ISO, GIS, DVS and other).By selecting any one of the standard and pipe diameter/SDR, all the welding parameters (pressure, time, temperature) would be automatically calculated according to the standard itself. If the chosen welding cycle is not included in the standards listed above, it is possible to manually input the welding parameters (diameter, SDR, type of material, welding time and pressure…) by simply entering the “out of standard” mode. In both cases, the machine is able to automatically manage all the phases of the welding cycle, including milling and heating control.
At the end of the welding cycle, all data are stored in the in-built memory, up to 4000 records.Serial ports enable the operator to connect the gearcase to a portable serial printer (to obtain an immediate report) or to a PC. The gearcase is equipped with a USB port for welding report in PDF and to firmware upgrade.
The complete configuration includes:- a linear transducer applied to the machine body- a extractable heating element SA or FA- hydraulic hoses with non-drip quick couplings for connecting the gearcase to the machine body- a milling cutter- a transducer cable for connecting the gearcase to the machine body- a milling cutter/heating plate support

ON REQUEST (ACCESSORIES) - Clamps’ inserts from Ø 75 to 225 mm (DELTA DRAGON 250 B)- Clamps’ inserts from Ø 75 to 280 mm with master 250 mm  (DELTA DRAGON 315 B)- Tool to weld flange necks/stub-end holder- Clamps’ wooden transportation box

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
Plastic Pipe Welding Delta 1200 Butt Fusion Ritmo  

DELTA 1200 can weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).
- A machine body with a steel bearing frame- Clamps and inserts in steel- Self detaching device: helps removing the heating plate during welding procedure- An extractable heating plate with separate thermometer for reading the working temperature- An extractable electric milling cutter with: Self detaching device, a safety microswitch and overload cutout- An electrohydraulic gearcase - Digital electric connections box with the temperature controller- A milling cutter/heating plate support
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 710 to 1100 mm; Master 1000 mm; 28" IPS ÷ 48" IPS- Tool for flange necks- Electrical crane- Machine body trolley- Data-logging THE INSPECTOR- Rollers 

Technical Specification:

Price on Request: Get Latest Price

Product Brochure
Plastic Pipe Welding Delta 1000 Butt Fusion Ritmo 

DELTA 1000 can weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).
- A machine body with a steel bearing frame- Clamps and inserts in steel- Self detaching device: helps removing the heating plate during welding procedure- An extractable heating plate with separate thermometer for reading the working temperature- An extractable electric milling cutter with a safety microswitch and overload cutout- An electrohydraulic gearcase - An electrical panel with power outlet for the heating plate and crane- A milling cutter/heating plate support
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 630 to 900 mm- Tool for flange necks- Electrical crane- Machine body trolley- Data-logging THE INSPECTOR- Rollers

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
BASIC 200 is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.
- A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings- An extractable heating plate with DIGITAL DRAGON, high - precision electronic thermo-regulator- An extractable milling cutter, with safety micro-switch- An electrohydraulic gearcase, with a clamp opening and closing lever- A hydraulic hoses with non – drip quick couplings- Adapters from Ø 63 to 180 mm

ON REQUEST (ACCESSORIES)- Tool for flange necks- Trolley- Rollers- THE INSPECTOR Data-logging- Pre-insulated bag for heating plate

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
DELTA 1600 HDR is a self-aligning welding machine with hydraulic clamps suitable for welding HDPE pipes for the transport of water and other fluids under pressure, up to Ø 1600 mm. The DELTA 1600 is designed in accordance to International standards (UNI 10565, ISO 12176-1). The DELTA 1600 can weld fittings such as elbows, tees, branches and flange necks.  
- Robust machine body made of steel- Steel hydraulic clamping- Automatic detaching device of heating plate- Raised platform deck for perfect monitoring of fusion process- Easy to operate control panel- INSPECTOR data logger compatible- On board hydraulic control gearcase- Pressure adjustment and pressure release valves for easy operations- Hydraulically controller facer with safety microswitch- Teflon coated heating plate with indipendent thermometer
ON REQUEST (ACCESSORIES)- Hydraulic pipe lift rollers- 4 wheeled trolley with extendable levellers for stabilization- THE INSPECTOR data logging- Steel inserts- Electrical crane
Technical Specification:

Price on Request: Get Latest Price

Product Brochure
Plastic Pipe Welding Gamma 160 Butt Fusion Ritmo 

GAMMA 160 is a manual butt welding machine for HDPE and PP pipes up to Ø 160 mm.
GAMMA 160 features special jaws for manufacturing elbows.Machine can also weld moulded fittings like bends, tees, wyes (Y) and flange necks up to Ø160 mm; short flange necks can be welded with the help of a stub end holder (on request), applied to the clamps. Machine body of GAMMA 160 is compact and easy to transport.
- A machine body with pressure regulating device of the bench vice closure - A steel frame for the support of the machine body- Steel sliding clamps with fast closing system- An heating plate with an electronic temperature control device- An electrically controlled milling cutter for levelling the ends of the pipe and/or fitting, with safety micro-switch against accidental starters- A support for the milling cutter and the heating plate- Steel adapters Ø 40, 50, 63, 75, 90, 110, 125, 140 mm- A case for the adapters
ON REQUEST (ACCESSORIES)- Tool for flange necks- Thin single clamp

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
Plastic Pipe Welding Delta 500 Butt Fusion Ritmo 

With DELTA 500 it is possible to weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).Available in 230 V and 400 V.
- A machine body with a steel bearing frame- Clamps in steel- Insert in steel with quick locking/unlocking system. No tools required- Self detaching device: helps removing the heating plate during welding procedure- An extractable heating plate with separate thermometer for reading the working temperature- An extractable electric milling cutter with a safety microswitch and overload cutout- Milling cutter’s plastic control box is protected by a metal frame- Unlocking Milling Cutter, fast removing system to speed up the extraction from machine body- An electrohydraulic gearcase - Digital electric connections box with the high precision (± 1°C) “Digital Dragon” temperature controller- A milling cutter/heating plate support
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 200 to 450 mm- Tool for flange necks- Electrical crane- Special transport wooden case (DELTA 500 only) - Special transport wooden case (machine body with trolley)- Wooden case for inserts- Machine body trolley- Data-logging THE INSPECTOR- Rollers

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
DELTA 160 M is a manual butt fusion welder for pipes up to Ø 160 mm.Leading particulars are the restricted weight, minimum overall dimensions and versatility.
Featuring: a machine body, two clamps, an extractable electric milling cutter provided with a safety micro-switch, an extractable heating plate (with an independent thermometer to see the real working temperature and an electronic thermoregulator “Digital Dragon” with display), and two lateral supports on request.
DELTA 160 M have a locking device clamps - aligner RITMO Patented, that helps the operator to apply the necessary welding force. The welder is equipped with a clamp-aligner system patented by Ritmo, thus allowing the operator to apply the correct welding force.The Digital Dragon is an high precision electronic thermoregulator (± 1° C accuracy) with digital display and regulating buttons. This new system includes Led indicators to check if the machine is working normally (live tension and working temperature), contingent probe’s failures and/or temperature anomalies.
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 32 to 140 mm- Lateral support- Trolley for machine transportation and support- Rollers

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
DELTA 630 ALL TERRAIN is the Pipe and Fittings FUSION Machine designed to face the toughest working conditions.DELTA 630 ALL TERRAIN wants to mark a turning point to the world of Field Fusion. It stands out for being extremely easy to set up and work with. Take the heating plate and facer disconnecting system for example; the positioning / removal of the pipes is made without obstacles, giving the operator more time for what really matters.
Italian design, known for paying particular attention to details, gives DELTA 630 ALL TERRAIN many technical innovations that are indeed practical. Take the clamps hydraulic system, for instance - not only an aesthetical maneuver, but a protection against collisions while positioning the machine inside the trench. Take the low fuel consumption and soundproofing gear – protects the environment, your health and saves your money!
DELTA 630 ALL TERRAIN is available in 2 models:DELTA 630 ALL TERRAIN CNC (automatic welding control system)DELTA 630 ALL TERRAIN EASY LIFE (automated welding cycle)
Welding standard: ISO 21307 High Pressure.
 Working range: Ø 225*  - 630 mm; 8" IPS - 24" IPS; 8" DIPS ÷ 20" DIPS *Ø 225 (from SDR 26 to SDR 7)- 4 steering wheels drive- Diesel-engine 2200 cc 22,7 Kw- Self-contained with on-board generator- Sliding 3rd CLAMP for fittings welding- Automatic welding System “Easy Life”- DATA-LOGGING with GPS- Possibility to pre-set 20 customized- Memory 4000 welding cycles- Report PDF - Detachable Control Panel- Remotely wire-controlled up to 12 m- Trench-Friendly- SmartLock Inserts- Hydraulic Lifts- Hydraulic-controlled Clamps and Milling cutter- Climbs rough terrain up to 30%- Wi-Fi ready App "SET and GO PRO"
 ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 225 to 630 mm - Tool for flange necks/stub-end holder- Kit for IN-DITCH use

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
DELTA 630 TRAILER is a self-aligning fusion machine, suitable for welding thermoplastic pipes for the transport of water, gas and other fluids under pressure, up to Ø 630 mm ( 24" DIPS)DELTA 630 TRAILER allows to easily weld fittings like elbows, tees, Y-branches and stub flanges 
Machine can fuse pipe according to the ISO 21307 High Pressure standard.
Standard machine features:- Machine body mounted on a 4 wheeled chassis, easily removable for working in tight spaces; steel hydraulic clamping with the RITMO Patented fast-locking inserts, which allows to place and remove inserts in seconds; self detaching device: helps removing the heating plate during welding procedure- 4 wheeled chassis with 2 steering wheels and a safety brake- An on-board hydraulic electric facer that is equipped with a safety microswitch to prevent from accidental starts, a thermal circuit breaker to protect motor- An on-board hydraulic heating plate Teflon-coated (PTFE) which comes with a high-temperature-proof bag, which also avoid the heating element from being scratched- An EASY LIFE control panel with a large graphic display and GPS traceability, which is also removable from the machine body to be able to weld from outside the ditch. Allows the operator to program and pilot all the welding cycle in an easy, fast and very intuitive way. Includes a data-logging system to store full welding data, downloadable through a USB port straight into PDF files. Possibility to pre-set 20 customized. The EASY LIFE system has the capability store up to 4000 joint reports- Two innovative lateral rollers that can be operated by a cordless drill- Control panel for hydraulic movements
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 225 to 560 mm;  8" IPS - 24" IPS; 8" DIPS ÷ 20" DIPS- Tool for flange necks- Kit serial printer

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
DELTA 500 TRAILER is a self-aligning fusion machine, suitable for welding thermoplastic pipes for the transport of water, gas and other fluids under pressure, up to Ø 500 mm.
Machine can fuse pipe according to the ISO 21307 High Pressure standard.
Standard machine features:- Machine body mounted on a 4 wheeled chassis, easily removable for working in tight spaces- New RITMO Patented assisted system to open/close/lift clamps-heater-facer- Machine body with an automatic heating plate detaching device: helps removing the heating plate safely and fast- Features the RITMO Patented fast-locking inserts, which allows to place and remove inserts in seconds- 4 wheeled chassis with 2 steering wheels and a safety brake- An on-board electric facer that is equipped with a safety microswitch to prevent from accidental starts, a thermal circuit breaker to protect motor and also features an ergonomic docking system and on/off switches- An on-board heating plate Teflon-coated (PTFE) which comes with a high-temperature-proof bag, which also avoid the heating element from being scratched- An EASY LIFE control panel with a large graphic display and GPS traceability, which is also removable from the machine body to be able to weld from outside the ditch. Allows the operator to program and pilot all the welding cycle in an easy, fast and very intuitive way. Includes a data-logging system to store full welding data, downloadable through a USB port straight into PDF files. The EASY LIFE system has the capability store up to 4000 joint reports.Possibility to pre-set 20 customized.- Two innovative lateral rollers that can be operated by a cordless drill
DELTA 500 TRAILER allows to easily weld fittings like elbows, tees, Y-branches and stub flanges.Available in 230V single phase or three phase.

ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 200 to 500 mm; 6" ÷ 18" IPS; 6" ÷ 18 " DIPS - Tool for flange necks- Kit serial printer

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
Pipe Welding Delta 630 easy life Butt Fusion Ritmo 

With DELTA 630 EASY LIFE it is possible to weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).
Thanks to a special gearcase  the DELTA 630 EASY LIFE is able to manage the welding process in a semi-automatic way from OD  280 to 630 mm.
The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters. 
The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port.  Possibility to pre-set 50 customized.The EASY LIFE system data-logging now shows the time! 
The DELTA 630 EASY LIFE version has a useful trolley, easily maneuverable with its handgrip.
- A machine body with a steel bearing frame- Clamps in steel- Insert in steel with quick locking/unlocking system. No tools required- Self detaching device: helps removing the heating plate during welding procedure- An extractable heating plate with separate thermometer for reading the working temperature- An extractable electric milling cutter with a safety microswitch and overload cutout- Milling cutter’s plastic control box is protected by a metal frame- Unlocking Milling Cutter, fast removing system to speed up the extraction from machine body- An electrohydraulic gearcase EASY LIFE - Digital electric connections box with the high precision (± 1°C) “Digital Dragon” temperature controller- A milling cutter/heating plate support
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 280 to 560 mm- Tool for flange necks- Electrical crane- Special transport wooden case (machine body with trolley)- Wooden case for inserts- Machine body trolley- Rollers 

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
BASIC 315 EASY LIFE, thanks to a special gearcase, is able to manage the welding process in a semi-automatic way.
The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters.
The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port. Possibility to pre-set 50 customized.The EASY LIFE system data logging now shows the time!
BASIC 315 EASY LIFE is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.
- A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings- An extractable heating plate - An extractable milling cutter, with safety micro-switch- An electrohydraulic gearcase EASY LIFE- A hydraulic hoses with non – drip quick couplings- Adapters SMARTLocK (RITMO patented) from Ø 90 to 280 mm, Master adapters Ø 250 mm 

ON REQUEST (ACCESSORIES)- Tool for flange necks;- Trolley;- Rollers;

Price on Request: Get Latest Price

Product Brochure
BASIC 250 EASY LIFE, thanks to a special gearcase, is able to manage the welding process in a semi-automatic way.
The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters.
The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port. Possibility to pre-set 50 customized.The EASY LIFE system data logging now shows the time!
BASIC 250 EASY LIFE is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.
- A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings- An extractable heating plate - An extractable milling cutter, with safety micro-switch- An electrohydraulic gearcase EASY LIFE- A hydraulic hoses with non – drip quick couplings- Adapters SMARTLocK (RITMO patented) from Ø 75 to 225 mm  

ON REQUEST (ACCESSORIES)- Tool for flange necks;- Trolley;- Rollers;

Price on Request: Get Latest Price

Product Brochure
BASIC 160 EASY LIFE, thanks to a special gearcase, is able to manage the welding process in a semi-automatic way. The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters.
The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port. Possibility to pre-set 50 customized. The EASY LIFE system data logging now shows the time! BASIC 160 EASY LIFE is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.
- A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings- An extractable heating plate - An extractable milling cutter, with safety micro-switch- An electrohydraulic gearcase EASY LIFE - A hydraulic hoses with non – drip quick couplings- Adapters from Ø 40 to 140 mm
ON REQUEST (ACCESSORIES)- Trolley- Rollers

Price on Request: Get Latest Price

Product Brochure
Plastic Welding Delta 355 trailer Butt Fusion Ritmo 

DELTA 355 TRAILER welds HDPE, PP pipes and fittings for the transportation of gas, water and other fluids under pressure from 125 mm to 355 mm or from 4” IPS to 14” IPS. It is designed to work according to welding standard ISO 21307 High Pressure. 
Machine composition:- Removable control panel with data-logging, memory up to 4000 welding reports, GPS treacebility; USB port for welding report / data download / firmware upgrade. Easy-life welding control system: hardware and software have been developed to interact to each other sharing data during the entire workflow. Once set the welding parameters up, the system guarantees the repetition of the welding cycle, avoiding errors. The operator only have to confirm the work phases on the just pushing a button. Possibility to pre-set 20 customized- Chassis is equipped with front steering wheels; parking brake, machine frame design for forklift lifting- Removable machine body to work in tight spaces with shavings collection tray- Dragging bar designed to weld between the 3rd and 4th clamp- Ritmo patented insert quick release SMARTLOCK SYSTEM- On-board electrical milling cutter with integrated locking handle system, safety switch-off device, motor thermicprotection and gas spring to easily lift/lower the facer- On-board heating plate with protection frame and insulated protection bag; gas-spring for easy lift/lower the heating plate- Heating plate and facer locking system for safe transportation- Two hydraulic rollers for pipe loading and unloading
ON REQUEST (ACCESSORIES)
Clamps’ inserts from Ø 125 to 315 mm (Master 250 mm); 4" ÷ 12" IPS; 4" ÷ 12 " DIPS - Tool for flange necks/stub-end holder- Inserts’ transportation box- Data-logging software and cable

Technical Specification:

Price on Request: Get Latest Price

Product Brochure

With DELTA 500 EASY LIFE is possible to weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).

The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters. 

The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port. 
Possibility to pre-set 50 customized.
The EASY LIFE system data-logging now shows the time!

- A machine body with a steel bearing frame
- Clamps in steel
- Insert in steel with quick locking/unlocking system. No tools required
- Self detaching device: helps removing the heating plate during welding procedure
- An extractable heating plate with separate thermometer for reading the working temperature
- An extractable electric milling cutter with a safety microswitch and overload cutout
- Milling cutter’s plastic control box is protected by a metal frame
- Unlocking Milling Cutter, fast removing system to speed up the extraction from machine body
- An electrohydraulic gearcase EASY LIFE
- Digital electric connections box with the high precision (± 1°C) “Digital Dragon” temperature controller
- A milling cutter/heating plate support

 

Technical features:

Materials             HDPE/PP/PB/PVDF

Working range  Ø 200 ÷ 500 mm

Power supply     230 VAC Single phase 50/60 Hz

400 VAC Three phase 50/60 Hz

Total absorbed power   7950 W (230 V); 7200 W (400 V)

Memory              4000 report

Working temperature    180° ÷ 280° C

Pressure working range  0 ÷ 150 bar

Weight body machine    230 Kg

Weight gearcase              37 Kg

Dimension body machine             1265x790x780 mm

Dimension gearcase        585x384x463 mm

Price on Request: Get Latest Price

Product Brochure

DELTA 250 TRAILER: self-aligning hydraulic butt fusion machine, suitable for welding under pressure pipes for water, gas and other fluids up to Ø 250 mm (8" DIPS). Built according to the International standards ISO 21307 HIGH PRESSURE.

DELTA 250 TRAILER is able to weld fittings like elbows, tees, Y-branches and flanges necks. Available in the 110 V and 230 V versions. Includes: 

- A trailer-mounted machine body, easily removable from the trolley
- Fast-locking adapters system SMART LocK RITMO Patented, thanks to which is possible to change adapters in few seconds 
- An on-board electric milling cutter with a safety microswitch 
- An extractable heating plate Teflon-coated (PTFE) equipped with an independent thermometer
- Two rollers
- An EASY LIFE control panel. It allows the operator to program and pilot all the welding duty cycle in an easy, fast and very intuitive way. It includes a data-logging system to store the welding data; report PDF file format.
Possibility to pre-set 20 customized. The EASY LIFE system can store up to 4000 joint reports
- A heating plate support which comes with a high-temperature-proof bag, which also avoid the heating element from being scratched

Technical features:

Materials             HDPE/PP/PB/PVDF

Working range  Ø 75 ÷ 250 mm; 2" IPS ÷ 8" DIPS

Power supply     110 V or 230 s-phase 50/60 Hz

Total absorbed power   4400 W (110 V) 4200 W (230 v)

Working temperature    180° ÷ 280° C

Outside temperature range         -10° ÷ 40° C

Weight 200 Kg

Dimension           1080 x 1380 x 1330 mm

 

Price on Request: Get Latest Price

Product Brochure
Plastic Pipe Compact 355 Pre-insulated pipes

COMPACT 355 is a worksite machine for pre-insulated pipes in PE, HDPE, PP, from OD 125 to 355 mm.Its small dimensions allow it to operate easily inside a dig, plus:- the machine has a 2-clamp machine body, to lock the outer coating of the pre-insulated pipe- its heating plate features the well known Digital Dragon high precision thermoregulator- the electrohydraulic gearcase comes inside a protective box- the milling cutter has a safety microswitch
STANDARD COMPOSITIONMachine body, electrohydraulic gearcase, milling cutter, heating plate with high precision thermoregulator, millingcutter/heating plate support, tool kit.
ON REQUEST- OD Ø 125 ÷ 315 mm inserts with a Master Ø 250 mm adapter,- Tool for flange necks.

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
BASIC 200 EASY LIFE, thanks to a special gearcase, is able to manage the welding process in a semi-automatic way.The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters.
The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port. Possibility to pre-set 50 customized. The EASY LIFE system data logging now shows the time!BASIC 200 EASY LIFE is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.
- A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings- An extractable heating plate- An extractable milling cutter, with safety micro-switch- An electrohydraulic gearcase EASY LIFE- A hydraulic hoses with non – drip quick couplings- Adapters from Ø 63 to 180 mm
ON REQUEST (ACCESSORIES)- Tool for flange necks - Trolley - Rollers

Price on Request: Get Latest Price

DELTA 630 TRAILER is a self-aligning fusion machine, suitable for welding thermoplastic pipes for the transport of water, gas and other fluids under pressure, up to Ø 630 mm ( 24" DIPS)
DELTA 630 TRAILER allows to easily weld fittings like elbows, tees, Y-branches and stub flanges 

Machine can fuse pipe according to the ISO 21307 High Pressure standard.

Standard machine features:
- Machine body mounted on a 4 wheeled chassis, easily removable for working in tight spaces; steel hydraulic clamping with the RITMO Patented fast-locking inserts, which allows to place and remove inserts in seconds; self detaching device: helps removing the heating plate during welding procedure
- 4 wheeled chassis with 2 steering wheels and a safety brake
- An on-board hydraulic electric facer that is equipped with a safety microswitch to prevent from accidental starts, a thermal circuit breaker to protect motor
- An on-board hydraulic heating plate Teflon-coated (PTFE) which comes with a high-temperature-proof bag, which also avoid the heating element from being scratched
- An EASY LIFE control panel with a large graphic display and GPS traceability, which is also removable from the machine body to be able to weld from outside the ditch. Allows the operator to program and pilot all the welding cycle in an easy, fast and very intuitive way. Includes a data-logging system to store full welding data, downloadable through a USB port straight into PDF files. Possibility to pre-set 20 customized. The EASY LIFE system has the capability store up to 4000 joint reports
- Two innovative lateral rollers that can be operated by a cordless drill
- Control panel for hydraulic movements

Technical features:

Materials             HDPE/PP

Working range  Ø 225* ÷ 630 mm; 8" IPS ÷ 24" DIPS 

*from SDR 26 to 7

Power supply     400 V Three Phase 50/60 Hz

Total abdorbed power   9300 W

Working temperature    180° ÷ 280°

Outside temperature range         -10° ÷ 40° C

Weight  machine body   1320 Kg

Weight trolley   435 Kg

Dimensions machine body           2500x1860x1475 mm

Dimensions trolley           3140x2100 mm

Price on Request: Get Latest Price

With DELTA 630 EASY LIFE it is possible to weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).

Thanks to a special gearcase  the DELTA 630 EASY LIFE is able to manage the welding process in a semi-automatic way from OD  280 to 630 mm.

The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters. 

The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port.  
Possibility to pre-set 50 customized.
The EASY LIFE system data-logging now shows the time! 

The DELTA 630 EASY LIFE version has a useful trolley, easily maneuverable with its handgrip.

- A machine body with a steel bearing frame
- Clamps in steel
- Insert in steel with quick locking/unlocking system. No tools required
- Self detaching device: helps removing the heating plate during welding procedure
- An extractable heating plate with separate thermometer for reading the working temperature
- An extractable electric milling cutter with a safety microswitch and overload cutout
- Milling cutter’s plastic control box is protected by a metal frame
- Unlocking Milling Cutter, fast removing system to speed up the extraction from machine body
- An electrohydraulic gearcase EASY LIFE 
- Digital electric connections box with the high precision (± 1°C) “Digital Dragon” temperature controller
- A milling cutter/heating plate support

  Technical features:

Materials             HDPE/PP/PB/PVDF

Working range  Ø 280 ÷ 630 mm

Power supply     230 Three phase 50/60 Hz: 400 V Three phase 50/60 Hz

Total absorbed power   12350 W

Absorbed power gearcase           1500 W

Memory              4000 reports

Working temperature    180° ÷ 280° C

Pressure working range 0 ÷ 150 bar

Weight only body machine  415 Kg

Weight gearcase              50 Kg

Dimension body machine             1550x1010x1000 mm

Price on Request: Get Latest Price

Product Brochure
Plastic Pipe Welding Delta 1600 Eco Butt Fusion Ritmo 

DELTA 1600 ECO can weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).
- Machine body with a bearing frame, four steel clamps and two hydraulic thrust cylinders with non-drip quickcouplings and steel inserts.- Extractable heating plate with separate thermometer for reading the working temperature.- Extractable electrically controlled milling cutter (with self detaching device) for levelling the ends of the pipe and/orfitting, with a safety microswitch, overload cut out, and emergency push button.- Electrohydraulic gearcase with a clamp opening and closing lever, maximum pressure and discharge valves (usefulalso during the “Dual Pressure” welding), hydraulic hoses with non-drip quick couplings, a timer (for the heating andwelding phases) and an electrical panel with a differential circuit breaker.- Milling cutter/heating plate support with an electronic thermoregulator for the control of the working temperatures.
Holes on the chassis to hook the machine for a rapid and easier handling.
ON REQUEST (ACCESSORIES)
- Clamps’ inserts from Ø 800 to 1400 mm; Master 1200 mm- Tool for flange necks- Electrical crane- Platform working area- Data-logging THE INSPECTOR- Raised platform deck

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure
Pipe welding Easy Life System Butt Fusion Ritmo 

EASY LIFE is an automated welding system able to manage the cycle of work, the heating plate, the milling cutter and the machine body.The electrohydraulic gearcase, controlled by a software, simplifies the work in the jobsite and avoids human mistakes.
EASY LIFE offers:
Ease of useQuality in welding
EASE OF USEHardware and software interact to each other sharing data during the entire workflow. Once set the welding parameters up, the system guarantees the repetition of the welding cycle. The operator only has to confirm the work phases just pushing a button on the control panel of the gearcase.
QUALITY IN WELDINGA data-logging constantly tracks the welding cycle and saves the data in an internal hard-drive capable to store up to 4000 welds. The data will be available through PDF reports, downloadable in a USB pen drive. The gearcase recalls from an archive up to 50 preferred settings, saved by the operator.

Technical Specification:

Price on Request: Get Latest Price

Product Brochure
BASIC 355 EASY LIFE, thanks to a special gearcase, is able to manage the welding process in a semi-automatic way.
The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters.
The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port. Possibility to pre-set 50 customized.The EASY LIFE system data logging now shows the time!
BASIC 355 EASY LIFE is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.
- A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings- An extractable heating plate - An extractable milling cutter, with safety micro-switch- An electrohydraulic gearcase EASY LIFE- A hydraulic hoses with non – drip quick couplings- Adapters SMARTLocK (RITMO patented) from Ø 125 to 315 mm, Master adapters Ø 250 mm 

ON REQUEST (ACCESSORIES)- Tool for flange necks;- Trolley;- Rollers;

Technical Specification: 

Price on Request: Get Latest Price

COMPACT 355 is a worksite machine for pre-insulated pipes in PE, HDPE, PP, from OD 125 to 355 mm.
Its small dimensions allow it to operate easily inside a dig, plus:
- the machine has a 2-clamp machine body, to lock the outer coating of the pre-insulated pipe
- its heating plate features the well known Digital Dragon high precision thermoregulator
- the electrohydraulic gearcase comes inside a protective box
- the milling cutter has a safety microswitch

STANDARD COMPOSITION
Machine body, electrohydraulic gearcase, milling cutter, heating plate with high precision thermoregulator, milling
cutter/heating plate support, tool kit.

ON REQUEST
- OD Ø 125 ÷ 315 mm inserts with a Master Ø 250 mm adapter,
- Tool for flange necks.

Technical features:

 

Materials             PE /HDPE/PP

Working range  Ø 125 ÷ 355 mm

Power supply     110V; 230 V 50/60 Hz

Total absorbed power   5100 W

Working temperature    180° ÷ 280° C

Weight only body machines        59 Kg

Weight standard composition     144 Kg

Dimension machine body             458 x 790 x 580 mm

Price on Request: Get Latest Price

Product Brochure

BASIC 160 EASY LIFE
Welding process in a semi-automatic way. The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters.

Basic 160 easy life Butt Fusion for Pressure Pipe:

The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port. Possibility to pre-set 50 customized. The EASY LIFE system data logging now shows the time! BASIC 160 EASY LIFE is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.

- A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings
- An extractable heating plate - An extractable milling cutter, with safety micro-switch
- An electrohydraulic gearcase EASY LIFE - A hydraulic hoses with non – drip quick couplings
- Adapters from Ø 40 to 140 mm

Technical Specification:  

 

Price on Request: Get Latest Price

Product Brochure
Plastic Pile Welding Delta 200 m Butt Fusion Ritmo 


DELTA 200 M is a manual butt fusion welder for pipes up to Ø 200 mm (6" DISP). Leading particulars are the restricted weight, minimum overall dimensions and versatility.
Featuring: a machine body, two clamps, an extractable electric milling cutter provided with a safety micro-switch, an extractable heating plate (with an independent thermometer to see thereal working temperature and an electronic thermoregulator “Digital Dragon” with display), DELTA 200 M have a locking device clamps  aligner that helps the operator to apply the necessary welding force. The Digital Dragon is an high precision electronic thermoregulator (± 1° C accuracy) with digital display and regulating buttons. This new system includes Led indicators to check if the machine is working normally (live tension and working temperature), contingent probe’s failures and/or temperature anomalies.
ON REQUEST (ACCESSORIES)- Clamps’ inserts from Ø 63 to 180 mm;  2" ÷ 6" IPS; 3" ÷ 6" DIPS - Lateral support- Trolley for machine transportation and support- Rollers

Technical Specification: 

Price on Request: Get Latest Price

Product Brochure

DELTA 250 TRAILER MANUAL: self-aligning hydraulic butt fusion machine, suitable for welding underpressure pipes for water, gas and other fluids up to Ø 250 mm (8" DIPS). Welds according to the International standards ISO 21307 HIGH PRESSURE / ASTM F2620.

DELTA 250 TRAILER MANUAL is able to weld fittings like elbows, tees, Y-branches and flanges necks. Available in the 110 V and 230 V versions. Includes: 

- A trailer-mounted machine body, easily removable from the trolley
- Fast-locking adapters system SMART LocK RITMO Patented, thanks to which is possible to change adapters in few seconds 
- An on-board electric milling cutter with a safety microswitch 
- An extractable heating plate Teflon-coated (PTFE) equipped with an independent thermometer
- Two rollers
- A heating plate support which comes with a high-temperature-proof bag, which also avoid the heating element from being scratched

Technical features:

Materials             HDPE/PP/PB/PVDF

Working range  Ø 75 ÷ 250 mm; 2" IPS ÷ 8" DIPS

Power supply     110 V or 230 s-phase 50/60 Hz

Total absorbed power   4400 W (110 V) 4200 W (230 v)

Working temperature    180° ÷ 260° C (356° ÷ 500° F)

Outside temperature range         -10° ÷ 40° C (14° ÷ 104° F)

Weight 227 Kg (500 lb)

Dimension           1100 x 1340 x 1300 mm

                                            43.3" x 52.7" x  51.1"

Price on Request: Get Latest Price

Product Brochure

ROLLER HS, this device is essential for supporting the pipes while they are being welded with the butt fusion machines. The rollers minimise pipe friction and drag force no matter which is the construction site condition.

Special design for ALL TERRAIN and TRAILER LINE.
- HS ROLLER 1000 with a working range up to Ø 1000 mm 36” DIPS