Leister Technologies India Private Limited

• User friendly
• Commendable functionality
• Impeccable capacity

• Lightweight and compact
• Digital display of temperature and velocity
• Closed loop control of temperature and drive
• Easy and user friendly

• 130 mm (5.12 in) heating wedge for faster welding
• Higher performance than GEOSTAR G5
• Hot-wedge welding machine with a strong drive motor
• Hot wedge replacement in less than one minute
• Display of the welding parameters and voltage

Reliable: Ergonomic handle for safe pressure during manual welding
Safe: Constant parameters and reliable quality – even with under voltage
Fast: Three times faster and more than manual welding using hot air gun
Customized: Reversible drive allows for welding in either direction
Practical: Compact and lightweight semi-automatic hot-air welder: 4.5 kg, 30 cm high
Flexible: Stainless steel nozzle for all welding application
Economical: Maintenance-free, brushless motors
Intuitive: Simple user guidance and operation via display

Whether on or at the roof parapet or welding domed skylights, connections, or small terraces – the dual drive of the UNIDRIVE 500 and the nozzle which can be rotated from left to right are impressive features which also show their worth when space is tight.

Thanks to intuitive user guidance, the UNIDRIVE 500 is easy to operate: Depending on requirements, the direction of the drive changes from left to right or vice versa based on the key combination entered. Undervoltage also poses no problem for the UNIDRIVE 500: A sensor ensures constant parameters and the quality of the weld is guaranteed. The display enables users to keep everything under control during welding.

• User friendly
• Commendable functionality
• Impeccable capacity

• Cuts grooves into all
• Types of floor coverings
• Extremely high, two stage
• cutting speeds
• Adjustable guide roller
• For tracking accuracy
• Reduced dust particles
• when used with dust bag
• Cutting close to the edge possible

• Easy to configure thanks to it’s multi-arm system
• Welding parameters digitally controlled and stored
• Intuitive user interface
• Guides can be changed quickly
• Endless tube welding
• Weld large products made from technical textiles in an efficient and safe mannerThe SEAMTEK 2000 AT hot air welding machine offers users even more space when welding particularly large products, such as bounce houses, covers, tents or inflatable advertisements. The easy-to-use, multi-arm system allows the machine to be configured in record time for specific applications. Setting the nozzle without tools, as well as quickly changing the rollers provides additional support for efficient work.The huge range of drive rollers, nozzles, guides and additional accessories offers the greatest possible flexibility. For example, with the aid of the belt feed system, tapes are welded with ease. An intuitive user interface allows the controlled parameters to be easily adjusted and saved via the touch screen. Thanks to its frame size, SEAMTEK 2000 AT is ideal for welding facade cladding in event/trade show construction, inflatable advertising materials and tents made from PVC, PP, PE, PU and other materials. The SEAMTEK 2000 AT is an excellent choice to weld large areas simply, economically and safely. For example, it welds shades, billboards, pool liners and covers made of plastic membranes or plastic-coated materials for fish breeding.

• No retooling, thanks to movable transportation axle.
• Maintenance-free direct drive and open-loop technology.
• Ergonomic handling, flexible relocating and optimal machine guiding.
• 38% higher welding performance compared to similar machines.

The new UNIROOF AT/ST roof welder is your flexible partner for welding thermoplastic roofing membranes on flat or pitched roofs (up to 30°). Thanks to its slim design and construction, as well as the movable transport axle, converting of the machine is no longer needed. Now, you can effortlessly weld close to the edge (to 100 mm / 4 inches) at the parapet or on the parapet and as easily in narrow circumstances. With 3450 W performance, 230 V and 15 Amps in the box, the UNIROOF AT/ST offers speedy top performance on any roof.

• Easy to configure thanks to it’s multi-arm system
• Welding parameters digitally controlled and stored
• Intuitive user interface
• Guides can be changed quickly
• Endless tube welding
• The SEAMTEK 2000 AT hot air welding machine offers users even more space when welding particularly large products, such as bounce houses, covers, tents or inflatable advertisements. The easy-to-use, multi-arm system allows the machine to be configured in record time for specific applications. Setting the nozzle without tools, as well as quickly changing the rollers provides additional support for efficient work.The huge range of drive rollers, nozzles, guides and additional accessories offers the greatest possible flexibility. For example, with the aid of the belt feed system, tapes are welded with ease. An intuitive user interface allows the controlled parameters to be easily adjusted and saved via the touch screen. Thanks to its frame size, SEAMTEK 2000 AT is ideal for welding facade cladding in event/trade show construction, inflatable advertising materials and tents made from PVC, PP, PE, PU and other materials. The SEAMTEK 2000 AT is an excellent choice to weld large areas simply, economically and safely. For example, it welds shades, billboards, pool liners and covers made of plastic membranes or plastic-coated materials for fish breeding.

• Welding speeds up to 12 m/min (39.4 ft/min)
• Tool-free, hem guide setting
• Quick and easy assembly
• Hands-free, foot pedal operation
• No additional welding required
• The efficient HEMTEK ST welding machine welds hems from start to finish. It's perfect for small and medium-sized banners made of PVC, PE, PP and other thermoplastics. The hem guide on HEMTEK ST comes in three sizes: 20 mm, 30 mm and 40 mm and opens up to 100 mm (3.9 inches) with piping.The HEMTEK ST can be used for a wide range of applications and is extremely intuitive to use. A high-quality, stress-free welding experience is guaranteed, thanks to its foot pedal, which allows both hands remain free to guide the material. The welding machine takes up very little space, can be set up quickly and is ready to weld as soon as it's assembled. HEMTEK ST doesn’t require any material preparation prior to welding or any welding with a heat gun afterwards. Hems on banners or tarpaulins can be welded from start to finish in one welding process.

• Technical Specification: 

• Location: New Delhi, Ahmedabad, Bengaluru, Chennai, Secunderabad, Kolkata, Bhopal, Mumbai, Pune

• Application: 

• Leister Quality System (LQS) with WiFi and GPS
• Durable and easy to service
• Integrated voltage display
• 100% faster than the TWINNY T

Leister's TWINNY T7 is the new edition of the well-rounded TWINNY T automatic welder. It is ideal for welding thick and thin geomembranes, made of HDPE, LDPE, TPO, FPO, PP, as well as PVC and CSPE. The speed, temperature, welding pressure and air volume of this combi-wedge automatic welder can be documented with Leister Quality System (LQS), via the myLeister app. The design of the plastic welding machine is ergonomic and user-friendly.

Large travel rollers (field kit) provide more ground clearance, which helps with plastic welding on rough or uneven surfaces. The TWINY T7s handles are well-positioned, making it easy to guide, move or transport the machine. The welding speed has been significantly improved by the powerful blower and the significantly higher heating output. Plastic welding is 100% faster with the TWINNY T7 than with its predecessor model TWINNY T. 

WiFi and GPS supported

The Leister Quality System (LQS) in conjunction with the myLeister app enables easy data recording, thanks to the tools GPS integration. The data can then be transferred via WiFi.

Brushless motor

The TWINNY T7 is durable and easy to service thanks to its brushless motor. You can rely on these automatic welders for a long time to come.

High-performance blower motor

100% faster than the previous model TWINNY T, thanks to its brushless blower motor and 3300 W heating power. This makes the TWINNY T7 the fastest in its product category.

APPLICATIONS - Virtually unlimited:

• Aquaculture construction and repair
• Foundation waterproofing
• Landfill and mining membrane welding
• Pond waterproofing
• Reservoirs and canals waterproofing
• Pool waterproofing

• Closed-loop electronics
• User-friendly "e-Drive" display
• Welding parameters can be saved
• Patented pressure roller
• With the innovative VARIMAT V2 welding machine, plastic membranes are welded quickly and economically on roofs, swimming pool liners, as well as banners and tarpaulins. The automatic welder can be easily operated by one person thanks to the adjustable guide handle. The users are pleased with optimal ergonomics, easy handling and the "e-Drive" operating unit: The digital display not only shows the temperature control, but stores the welding parameters to ensure optimal welding seams, even after breaks or over days.Depending on the material, plastic membranes are efficiently and effectively welded at up to eight meters per minute. Leister is able to test materials at customer request to determine the appropriate parameters required for optimal welds. The VARIMAT V2 was already tested under the most difficult conditions, including the winter months, and made an impression here with high maximum welding speed and constant temperature. The brushless, low-maintenance automatic welder keeps service efforts low, even with intense workloads. Even during close–to-edge welding, the VARIMAT V2 will impress you with its incredible capabilities. The VARIMAT V2 impresses with reliable, wrinkle-free and leakproof welding. Lastly, the automatic welder turns off when undervoltage is too great, ensuring a safe welding process.

• Powerful hot-air blower with 18,000 rpm
• Brushless blower motor
• Single motion nozzle engagement
• Automatic material lifting device
• Adjustable swivel wheel to avoid obstacles

• Virtually unlimited
• Tent tarpaulin welding
• Advertising banner welding
• Protective cover welding
• Plastic fabric hoses welding
• Textile roofing and facade welding
• Inflatable plastic fabrics welding
• Pond waterproofing
• Awning and wind blocker welding
• Truck tarpaulin welding
• Pool waterproofing

• Digital display shows all important welding parameters
• Mechanical over pressure protection
• Welding speed is 50% faster than the TWINNY T
• Easy to operate, thanks to hot-air technology

• Virtually unlimited
• Aquaculture construction and repair
• Foundation waterproofing
• Landfill and mining membrane welding
• Pond waterproofing
• Reservoirs and canals waterproofing
• Pool waterproofing

The advent of the GEOSTAR for welding geomembranes marks the appearance of a hot wedge welding machine perfected for civil engineering that redefines state-of-the-art technology.

The compact, cast aluminum frame construction offers sporty maximum power for the hardest applications: With heating capacity/heating power of up to 2500 Watts, peak welding speeds of up to 12 m/min (39 ft/min), and height-adjustable chassis, the GEOSTAR can handle any terrain without difficulty.

The digital operating unit (“eDrive”) with integrated display permits permanent monitoring of all the key weld parameters (heat, speed, pressure, and voltage) during the work process.

This sleek new design makes field servicing a cinch - wedge can be removed and replaced in under a minute. Additional features include easy loading of material, the natural flow of material through the machine, integrated clamping grip engagement, innovative ergonomics that allow one-hand operation, and three different parking and maintenance positions.

• Welding speed: up to 12 m / 39 ft. per minute
• Digital display of all three critical weld parameters:  heat, speed, and pressure
• Very high heating capacity/heating power
• Welding wedge replacement in under a minute!
• Integrated voltage display
• Adjustable chassis height
• Materials: HDPE 1.0 - 3.0 mm; PP. LDPE, TPO, FPO (others upon request)
• Application: hot wedge welding machines for welding geomembranes

The GEOSTAR also features an operating unit with an integrated voltage display for permanent monitoring of weld parameters and voltage. The new design makes wedge replacement a cinch and can be accomplished in under a minute.

Additional features include generous material input, smooth-motion gliding of geomembranes—thanks to new wedge geometry—and three different parking and maintenance positions.

• ideal for thin membranes in underground projects
• optimized for overhead welding
• temperature and drive variably adjustable

• plastic sheet welding - geostar g5 lqs - leister 
• 90 mm (3. 5 in) hot-wedge for pe
• recorded welding parameters
• gps function shows welding location details
• ergonomic, single-hand operation
• including storage box
• technical data
  article156. 135voltage230 vfrequency50/60 hzpower2800 wtemperature80 - 460 °cspeed0. 8 - 12. 0 m/minwelding technologyhot wedgehot wedge length90 mmhot wedge width50 mmhot wedge materialcoppermax. Overlap150 mmmax. Welding pressure1500 nweld seam width2 x 15 mm / 2 x 0. 59 inlqs yeslength482. 0 mmwidth278. 0 mmheight269. 0 mmweight16. 8 kgwelding materialspe , hd-pe , ld-pe , lld-pe , pp , tpo , fpoplugeu, 3 poles, 16apower cable length3. 0 mconformity markceprotection classicountry of originch

• Blower motor with brushes
• Hot-air blower welding capacity of 12,500 rpm
• Display for setting the welding parameters

• Automatic and safe: Swiveling in of the nozzle 
• Practical: Integrated lifting of the tarpaulins
• Movable swivel castor wheel: To avoid obstacles such as grommets and hooks
• Quick modification: Users can change from overlap welding to hem or pipe welding in one, easy step
• Reliable: Controlled temperature and speed
• Storable parameters: Material-specific parameters are saved to ensure repeatable processes on future projects (UNIPLAN 500)

Whether you are welding truck tarpaulins, tents, or banners, the UNIPLAN 300 and UNIPLAN 500 automatic welders are the ideal choice. Integrated lifting of the tarpaulins and automatic swiveling-in of the nozzle make the work easier for you and increases reliability. Thanks to the movable swivel castor wheel, it is easy to get around obstacles such as grommets, hooks, or other accessories. Automatic, practical, safe – UNIPLAN 300 / UNIPLAN 500.

• Fastest, most precise automatic
• Tape welding tool (up to 18 m/min)
• Easy to use
• Taut tape guidance
• Kits for converting VARIANT
• T1 Overlap to 25 or 50 mm TAPE

Features: 

• Welding speed up to 18 m/min (59 ft/min)
• Best view of the welding process
• Perfect for professional use
• Lifting device for perfect positioning
• Leister e-drive operating concept

• Smoke-free, low-noise
• Welding using hot-wedge technology
• Digital temperature and speed display
• Integrated guiding plates
• No non-welded edge zones
• Ideal for indoor applications

• Longer functional life
• Impeccable performance
• Easy maintenance

• At 450 mm, it is the shortest
• In its performance class!
• Motor start-up protection prevents cold start
• Simple operation
• Dual-sided, twist-free wire intake
• 360° rotating welding shoe
• Integrated electronics for stepless adjustment
• The preheating temperature and output quantity

• 6 kg / 13.2 lbs. of output per hour
• Highest possible preheating capacity
• Adjustable control wheel
• Maintenance-free hot-air blower

• Rod shape: Reduced design for increased maneuverability in small spaces

• Double-sided wire intake: For more flexibility when welding

• LED light: To illuminate the welding area

• Controlled: Automatically controlled air temperature

• Suspension device: Effortlessly weld longer by hanging up the device

• Compact and slimline: Thanks to integrated air guide

• Handle: Can be mounted for one-handed welding

 

Your satisfaction is our goal. Which is why we are developing welding devices to meet your requests and requirements. And with the usual LEISTER quality, of course. The reduced design of the FUSION 1 offers increased maneuverability when welding. More flexibility guarantees an optimally mountable handle.

 

Brilliantly simple extrusion welding – FUSION 1.

Technical Specification: 

Attribute	Unit	Value
Voltage	V~	230
Power	W	1200
Frequency	Hz	50/60
Air temperature	°C	180 - 350
Max. Plastification temperature	°C	300
Welding rod	mm ∅	3 - 4
Output ∅ 3	kg / h	0.2 – 0.5
Output ∅ 4	kg / h	0.3 – 0.8
Size (L × B × H)	mm	436 × 92 × 133 (236 with handle)
Weight	kg	3.4
Conformity mark
Protection class II

• extrudes tpo plastics
• lightweight
• especially useful in tunnel construction and underground engineering
• detailsspecialized handheld extruderthe weldplast s2 tpo extruder is designed specifically to process thermoplastic elastomers with an olefin base. This type of plastic requires a different plasticization process, as well as specific extruder screws. Tpo plastics are used primarily in tunnel construction and underground engineering. In this kind of work and application, the weldplast s2 tpo makes the most of its size and weight due to a large part of the welds taking place overhead. These applications can only be handled over a longer period of time with such a light device.
• technical dataarticle136. 602voltage230 vpower3000 wfrequency50/60 hzmax. Material output2. 0 kg/hwelding additiveø 3mm/ 0. 12 in , ø 4 mm / 0. 16 inwelding materialstpo , fpo , hd-pe , ld-pe , lld-pe , ppair guideinternalscrew heatingcoil heaterlength450. 0 mmwidth98. 0 mmheight260. 0 mmweight 5. 8 kgair temperature controlclosed loopplugeu, 3 poles, 16aprotection classiconformity markcecountry of originch

• Rod shape: Reduced design for increased maneuverability in small spaces

• Double-sided wire intake: For more flexibility when welding

• LED light: To illuminate the welding area

• Controlled: Automatically controlled air temperature

• Suspension device: Effortlessly weld longer by hanging up the device

• Compact and slimline: Thanks to integrated air guide

• Handle: Can be mounted for one-handed welding

Your satisfaction is our goal. Which is why we are developing welding devices to meet your requests and requirements. And with the usual LEISTER quality, of course. The reduced design of the FUSION 1 offers increased maneuverability when welding. More flexibility guarantees an optimally mountable handle.

Brilliantly simple extrusion welding – FUSION 1.

• bilateral, tangle-free rod feed
• 360° rotating welding shoe
• stable, ergonomic handheld extrusion welder
• particularly compact extrusion welder
• lightweight
• the fusion 2 extrusion welder from leister is equipped with bilateral, tangle-free rod feed and impresses with its 360° rotating welding shoe. It's a reliable and adaptable extrusion welder and at 45 cm (17. 71 in) long, the fusion 2 is very compact. In addition, the integrated electronics allow for a stepless setting of the output volume and pre-heating temperature. The welder is ideal for welding pe and pp with a welding rod of 4 mm (0. 16 in) diameter. Furthermore, at 5. 9 kg (13 lbs. ) the fusion 2 is still among the lightest handheld extruders, capable of achieving a maximum air temperature of 340 °c (644 °f) and a maximum plastics temperature of 300 °c (572 °f). It generates an output volume of 1. 3 to 1. 8 kg/h (2. 8 - 3. 9 lbs/hr).
• technical datavoltage120 - 230 vpower2600 - 2800 wfrequency50/60 hz; 60 hzmax. Material output1. 8 kg/hwelding additiveø 4 mm / 0. 16 inwelding materialshd-pe; ld-pe; lld-pe; ppair guideinternalscrew heatingair heatedlength450. 0 mmwidth98. 0 mmheight225. 0 mmweight 5. 9 kgair temperature controlopen loopplugcee yellow, 3 poles, 16a; cee blue, 3 poles, 16a; kr, 2 poles, 16a; eu, 2 poles, 16aprotection classiiconformity markce; kc

• User friendly
• Commendable functionality
• Impeccable capacity

• High welding performance
• Compact and handy
• Motor start-up protection
• Prevents cold start
• Dual-sided twist-free wire intake
• 360° rotatable welding shoe

Solano AT is a versatile heat gun that can be used in various applications like cable sleeve shrinking, car wrapping, car stickering, tarpaulin welding, flex joining, leather smoothing, leather shaping, truck tarpaulin repairs, forming with hot air, hot-air shrinking, heat shrink tubing, cable treatment with hot air, cable assembly, aircraft cable production, cable harnesses, shrink tubes, etc.

Solano AT is the most advanced hot air gun available on the market. The features include:

• Long-lasting: thanks to the brushless motor and sturdy Leister heating element
• Light and quiet: weighs 750 g and runs extremely smoothly at <65dB for efficient and effortless operation
• Economical: saves up to 40% energy in Eco mode
• Safe: due to its multi-level system to protect against overheating
• Simple: due to its intuitive operation
• Controlled: consistent performance due to the intelligent temperature controller
• Versatile: suitable for numerous applications in various industries
• A.B.D (anti-burn design): For a safe handling of the hot-air blower