Leister Accessories

Price on Request: Get Latest Price

Product Brochure
GEO MEMBRANE PULLER

• Original Leister geo membrane puller. 

• Manufactured in Switzerland.

• Ideal for 1.0 – 3.0 mm thickness membrane.

• Application: Helps to move sheets on sites,  water, and chemical storage ponds. Also works in waste storage or landfills, mining, tunnels, etc firmly making it ideal for welding.

Price on Request: Get Latest Price

•  Polypropylene rod used for welding can be used very extensively, and it's longer lasting and safer to use than many of the alternatives. 

The PP rods are manufactured using only the highest grade resin materials to guarantee you receive the very best welding rod available. The 4mm round is most commonly used in all major applications. The best quality allows you to make stronger welds. PP rods comes in two variants in 5kg packs.

• High Density Polyethylene (HDPE) is used in many different applications. When welding, you must use the same welding rod as your material (example HDPE to HDPE). 

 

Price on Request: Get Latest Price

Product Brochure
LEISTER SILICONE ROLLER 

• Size: 28, 40 mm roll

• Original Leister silicone arm roller. 

• Manufactured in Switzerland.

• Industry quality wood is used for the handle.

• The silicone wheel can be replaced.

• Free movement of wheel help in giving pressure to a wider area.

• Application: Roof membrane welding, civil engineering, geomembrane welding projects, and technical textiles or industrial fabrics. Applications such as banner welding, commercial vehicle side curtains, PVC, TRO, and tarpaulin welding and repair.

Price on Request: Get Latest Price

THE INSPECTOR - DATA LOGGING that controls, records and generates a PDF report of the entire welding process. The Inspector is an “open system” that can be used with Ritmo machines or others. The large graphic display allows an easy reading of welding reports. THE INSPECTOR is installed in a hard case made of PP, with protection degree IP 67. It is sold with a bag that contains the data logging and the battery charger with international adapters.

- Preloaded Major Welding Standard (ISO, DVS, and others)
- Memory of 1000 cycles - USB port for Welding Report in PDF
- Integrated GPS - Firmware upgradable via USB
- Battery operated (24 hr of operational work)
- Battery charger with international adapters
- Built-in plastic case in PP with IP67 protection class
- Transport bag
- Applicable to Ritmo machines and other

Standard composition
- THE INSPECTOR, transport bag, battery, charger and International adapters.

 

  Technical features:

- Power supply 24 V DC

- Outside Temperature Range -10° C 40° C

- Protection Degree IP 67

- Dimensions Data Logging 240 x 265 x 110 mm

- Weight 2,6 Kg

 

Price on Request: Get Latest Price

Product Brochure

"SET & GO PRO" a Professional application for smartphones and tablets (Android) that changes forever the way to work with the Ritmo Easy Life butt fusion machines.
"SET & GO PRO" Put together the ease of use, innovation and quality, in a system with the advantages of a CNC welding system, but reducing significantly the costs of it.

ADVANTAGES
It eliminates the expensive hardware of a data-logging and offer the highest quality at the lowest cost.

HOW DOES IT WORK?
Set-up the easy life welding machine through your smart-phone/tablet with few and easy steps: choose the international welding standards (ISO, DVS, UNI, ASTM, etc.), pipe diameter and SDR.
With the GPS and smartphone scanner you can collect, transfer, and store information by project name. You can record the exact location of each pipe weld as well as the construction site, you can scan pipe and fitting barcodes, scan operator badge, and take a photo before and after the installation.
With a detailed report at the end of each weld you have all the technical data with exact graphs and parameters to compare against international welding standards and geolocation map.
You can quickly share the welding reports in pdf format via email and whatsapp or save them to your phone or on a cloud archive.
Choose "SET & GO PRO" because safety and quality are part of your job!

  Technical features:

Language available: English, Spanish, Italian.

Machine model: you may choose from the list of Ritmo’s butt fusion hydraulic machines or digit the piston area (cm2, in2).

Welding standard: ISO 21307 SLP/DLP/SHP, UNI 10520 SINGLE/DUAL, DVS 2207-1, DVS 2207-11, ASTM F2620-13, WIS 4-32-08. You may also digit the interface pressure (MPa, bar, psi).

Pipe diameter: you may choose from the list or digit the data (mm, in, IPS, DIPS).

SDR: you may select it from the list or digit the pipe thickness (mm, in).

Material: PE, PEHD or PP.

Dragging pressure: bar or psi.

Display of welding parameters: °C/bar or °F/psi.

Timer: the alarm starts sounding in the last 10 seconds of each phase.

Price on Request: Get Latest Price

Product Brochure

Internal Debeader by RITMO S.p.A. covering a range from Ø 90 up to 630 mm (3" IPS ÷ 24" IPS)

ADVANTAGES: Intuitive and easy to use, accurate, versatile, composed of few parts.

- Internal Debeader Head 90 - 110 mm
- Internal Debeader Head 125 - 160 mm
- Internal Debeader Head 160 - 200 mm
- Internal Debeader Head 225 - 315 mm
- Internal Debeader Head 355 - 500 mm
- Internal Debeader Head 560 - 630 mm

Internal Debeader Heand can be ordered separately too.

A complete kit set is composto by:
- pcs of alloy rods 2,15 mtr each (one is acting as turn handle)
- 1 centering brackets to ensure that the rods are in center of the pipe
- Alloy rods are delivered in a special carrying bag with a handle

Technical features:

 

Moldes SDR

Ø 90 mm              17 ÷ 26

Ø 110 ÷ 450 mm               11 ÷ 26

Ø 500 mm           11* ÷ 26

* up to 34 mm

Ø 560 ÷ 630 mm               11 ÷ 41

Materials             HDPE, PP, PP-R, PVDF

Price on Request: Get Latest Price

ROLLER HS, this device is essential for supporting the pipes while they are being welded with the butt fusion machines. The rollers minimise pipe friction and drag force no matter which is the construction site condition.

- HS ROLLER 630 with a working range up to Ø 630 mm 24” DIPS

Price on Request: Get Latest Price

ROLLER HS, this device is essential for supporting the pipes while they are being welded with the butt fusion machines. The rollers minimise pipe friction and drag force no matter which is the construction site condition.

- HS ROLLER 250 which can sustain pipes up to Ø 250 mm 8" IPS 

Price on Request: Get Latest Price

Product Brochure
The range of Pipe Welding Accessories made available by us in the market, is widely known to be one of the finest that are available in the market. Making of this range is done as per the set industry norms and guidelines, utilizing the finest raw materials and modern machines. This ensures the product’s functionality, functional life and precision. In addition, the product’s reasonable pricing, makes it highly demanded in the market.

Features:

• Longer functional life
• Impeccable performance
• Easy maintenance

Price on Request: Get Latest Price

Product Brochure

CHAMFERING tools are designed to make a bevel on the outside edge of a pipe end for socket fusion / electrofusion.
This Chamfer allows heater faces and socket fittings to be easily pushed onto the pipe end.

 

Technical features:

 

Model     Working range                Materials

Chamfering   20 Ø 20 mm              HDPE, PP, PB, PCV, PVDF

Chamfering 25   Ø 25 mm              HDPE, PP, PB, PCV, PVDF

Chamfering 32   Ø 32 mm              HDPE, PP, PB, PCV, PVDF

Chamfering 40   Ø 40 mm              HDPE, PP, PB, PCV, PVDF

Chamfering ½” CTS          Ø ½” CTS              HDPE, PP, PB, PCV, PVDF

Chamfering ¾” IPS           Ø ¾” IPS               HDPE, PP, PB, PCV, PVDF

Chamfering 1” IPS            Ø 1” IPS                HDPE, PP, PB, PCV, PVDF

Chamfering 1 ¼” IPS        Ø 1 ¼” IPS           HDPE, PP, PB, PCV, PVDF

Chamfering 1 ½” IPS       Ø 1 ½” IPS           HDPE, PP, PB, PCV, PVDF

Chamfering 2” IPS            Ø 2” IPS                HDPE, PP, PB, PCV, PVDF

Price on Request: Get Latest Price

• Original Leister Hand Groovy. 

• Manufactured in Switzerland.

• Lightweight equipment makes it easily moveable for a clear cut.

• Application: Shape cutter for the layer of plastic floor coverings made of PVC or linoleum.

Price on Request: Get Latest Price

Product Brochure

Kela is a universal and compact aligner suitable for plastic pipes, fittings and electrofusion saddles.
Thanks to its particular clamp design, it is possible to aligne pipes and fittings in a straight position or at 45° and 90°.

Kela is equipped with two plates: a wide and a narrow one, to be used according to the application.

The wide plates are used for the straight alignement and give a better grip and positioning, while the narrow plates are designed to make Kela more compact and therefore easier to use in the 45° and 90° application, as well as in narrow working conditions or electrofusion saddles welding.

The working range can be easily adjusted thanks to these interchangeable plates.

Kela is supplied with a transport bag and it is available in metric version with working range Ø 16 ÷ 63 mm;
in inches CTS: Ø ½” ÷ 2” CTS
in inches IPS: Ø ½” ÷ 2” IPS

 

Techinical Featurs

Working range

Metrical: Ø 16 ÷ 63 mm

inches CTS: Ø ½” ÷ 2”

inches IPS: ؽ” ÷ 2”

Type of alignement

Straight - 45° - 90°

Weight 1,4 Kg

Weight including the transport bag          2 Kg

Kela minimum dimensions           206 x 155 x 104 mm

Kela maximum dimensions          298 x 126 x 153 mm

Bag dimensions 400 x 180 x 130 mm

Price on Request: Get Latest Price

Product Brochure

MAYA 20-63, manual tool for beveling the ends of plastic pipes for electrofusion, socket fusion, pipe connection.
Maya 20-63 covers a range from 20 to 63 mm.
Compact and lightweight this chamfering tool proves to be a useful tool to always have in the toolbox.

Technical features:

Working range  :Ø 20 ÷ 63 mm

Materials :            HDPE, PP, PB, PVDF, PVC

Dimension :         60 x 80 mm

Weight : 90 gr

Price on Request: Get Latest Price

Product Brochure
ALIGNER ECO 63 - 180 is an essential and professional tool for the alignment and support of pipes during electrofusion from Ø 63 mm to 180 mm (2” IPS ÷ 6” DIPS). The ALIGNER is entirely made of steel, featuring a central adjustable joint and pipe fastening clamps fixed on axes. The adjustable joint can be set on 4 different working positions to allow welding at preset angles such as 30°, 45°, 90°, “in line” and T welding. Axes have V-shaped clamps positioned on them, which are equipped with pipe fastening belts. The system, along with fixing the pipe to the clamp, serves also as a centering device. Each axis has 2 guides on which the clamps are able to slide. Practical side handles ensure an easy grip during movement and positioning, both during welding procedures, and preparation. The aligner

Price on Request: Get Latest Price

LEISTER TRIMMING KNIFE FOR VINYL FLOORING 

• Size: 0.5, 0.6, 0.7 mm of separate blade. 0.6 mm - PVC, and linoleum, PVC (0.5 mm), linoleum blades (0.7 mm).

• Original Leister trimming knife.

• Manufactured in Switzerland.

• Application: to trim welds vinyl flooring.

Price on Request: Get Latest Price

LEISTER SEAM PROBE TESTER

• Original Leister Plastic Welding nozzle. 

• Manufactured in Switzerland.

•  A seam probe tester is used to check for a perfect seam finish.

• The rough metal edge helps to spot the incomplete seam welded edges by not damaging the material.

• Leister seam probe tester comes with a sturdy handle

Price on Request: Get Latest Price

PRESSURE ROLLER 28MM

• Size: 28 mm roll.

• Original Leister Pressure

• Manufactured in Switzerland.

• Industry quality wood is used for the handle.

• The silicone wheel can be replaced.

• Free movement of wheel help in giving pressure to a wider area.

• Application: Roof membrane welding, civil engineering, geomembrane welding projects, and technical textiles or industrial fabrics. Applications such as banner welding, commercial vehicle side curtains, PVC, TRO, and tarpaulin welding and repair.

Price on Request: Get Latest Price

Product Brochure

• Handy, robust and reliable
• Testing of elongation, peak force, tear force, test speed and position
• Construction-site approved

Is the welding seam sealed and can it withstand the specified peeling, tensile and shearing forces? EXAMO performs tests at the construction site – quick, reliable and uncomplicated.

Price on Request: Get Latest Price

Product Brochure

RED - Ritmo External Debeader
Intuitive, Easy to use, Accurate, Versatile.
For pipes up to 1200 mm and sheets

External Debeader by RITMO S.p.A. covering a range from Ø 63 up to 1200 mm!

Designed to remove the external bead from a complete butt fusion welded joint.
The tool knocks onto the pipe bead, then alignment blocks slide against the pipe surface to guide it around the pipe
The blade cuts the under the bead and the handle helps pull the tool around the pipe, cutting the bead away.

RED works on flat surfaces too and removes the bead from plastic sheets without the guides for pipes.

Available in three different sizes

- RED 63 - 125
- RED 90 - 400
- RED 400 - 1200

Technical features:

 Models Working range Ø

 

RED 63 - 125       63 ÷ 125  mm

                           2" IPS ÷ 4" IPS

RED 90 - 400       90 ÷ 400  mm

                            3" IPS ÷ 14" DIPS

RED 400 - 1200      400 ÷ 1200  mm

                              16" IPS ÷ 48" IPS

Material :                          HDPE            

 

Price on Request: Get Latest Price

Product Brochure

• Cordless, battery operation with maximum flexibility
• General-purpose milling blade for plastic and natural floor coverings
• LED light to illuminate the grooving area
• Sensing roller for reliable grooving, even on uneven floors
• Side stop for grooving along rails
• Three-point stand, enabling increased stability
• Adjustable side roller for reliable grooving on pimpled floor coverings
• Optimized rear guide roller for precise positioning

Grooving on even or uneven floors made from plastic or natural materials, close to the edge or along a guide rail is done with ease thanks to Leister's cordless grooving machine, GROOVER 500-LP. No more messy, tangled cords or tedious searching for electric power sockets on the job site. Your GROOVER 500-LP lets you switch from one room to another in no time. Cordless, powerful, reliable - that’s your GROOVER 500-LP. 

Price on Request: Get Latest Price

Product Brochure
LEISTER CUTTER FOR FLOORING, ROOFING & TECHNICAL TEXTILES

• Original Leister trimmer and cutter. 

• Manufactured in Switzerland.

• 4 blades attached make it an ideal tool for trimming.

• Application: Trimming vinyl on the floor laying jobs, roofing applications, and technical textiles.

Price on Request: Get Latest Price

• Original Leister Spatula Knife. 
• Manufactured in Switzerland.
• Application: Trimming excess weld rod along flat surfaces, flexible and easy to use with trimming guide